SP-35004U

Product Description

SP-35004U is a 50 durometer silicone base designed for applications requiring the A-A 59588 Class 3A Grade 50 spec. Passes DeMattia Flex Fatigue (min 140,000 cycles to failure)

Product Features

  • SP-35004U is designed with good processability and excellent mechanical properties, especially flex fatigue.

Typical Applications

  • Molding applications for a wide range of products.

Typical Properties

Type of HCR
General Purpose
Cure Agent
DBPH
Durometer
50
Tensile Strength (psi)
1884
Elongation (%)
804
Specific Gravity
1.17
Tear Die B (ppi)
255
Cure Time (minutes)
15
Cure Temp. (°C)
171
Cure Temp. (°F)
339.8

Note: Values are not for specification purposes.

Warranty- The information and data contained herein are believed to be accurate and reliable; however it is the user's responsibility to determine suitability of use. Since Shin-Etsu Silicones, Inc. cannot know all of the uses to which its products may be put or the conditions of use, it makes no warranties concerning the fitness or suitability of its products for a particular use or purpose. You should thoroughly test any proposed use of our products and independently conclude satisfactory performance in your application. Likewise, if the manner in which our products are used requires governmental approval or clearance, you must obtain it. Shin-Etsu Silicones, Inc. warrants only that its products will meet its specifications. There is no warranty of merchantability of fitness of use, nor any other expressed or implied warranties. The user's exclusive remedy and Shin-Etsu Silicones, Inc.'s sole liability is limited to refund of the price or replacement of any product shown to be otherwise than as warranted. Shin-Etsu Silicones, Inc. will not be liable for incidental or consequential damages of any kind. Suggestions of uses should not be taken as inducements to infringe any patents.

SP-35004U
Shipping Info: